Wednesday, July 6, 2022 β€’ Welcome to the πŸ’― No-Nonsense Zone!
Check out Today's Deals! πŸ›οΈAmazon logoπŸ”₯

TP-Link Deco X4300 Pro (vs Deco X60): Looking Like a Fair Value Mesh Set

TP-Link today officially announced the availability of its latest Deco X4300 Pro mesh Wi-Fi system. “Officially” is the key since the new Wi-Fi solution has been listed at BestBuy and elsewhere for a while.

That little discrepancy aside, the Deco X4300 Pro looks awfully similar to the entry-level Costco-exclusive Deco X60 that came out more than two years ago.

Deco X4300 Pro Set
The Deco X4300 Pro includes three identical mesh routers.

Deco X4300 Pro: A new Deco that seems so familiar

Like the case of the Deco X60, the Deco X4300 Pro comes in three identical units. Each is a compact tube-shaped white router that measures 4.33 in (110 mm) wide and 4.49 in (114 mm) tall.

And as part of the Deco family, it also shares the same firmware as the X60, hence, the similar settings and features. But the similarities between the two end there, as you’ll note in the data table below.

Deco X4300 Pro vs Deco X60: Hardware specfications

Full NameTP-Link Deco X4300 Pro
AX4300 Mesh Router
TP-Link Deco X60 
AX3000 Mesh Router
ModelDeco X4300Deco X60
Dedicated Wireless BackhaulNoNo
Wired BackhaulYesYes
Dimensions4.33 in (110 mm) wide 
4.49 in (114 mm) tall
4.33 in (110 mm) wide 
4.49 in (114 mm) tall
Wi-Fi TechnologyDual-band AX4300Dual-band AX3000
5GHz Wi-Fi Specs3×3 AX: Up to 3800Mbps2×2 AX: Up to 2400Mbps
2.4GHz Wi-Fi Specs2×2 AX: Up to 600Mbps2×2 AX: up to 600Mbps
Backward Compatibility802.11a/b/g/n/ac Wi-Fi802.11a/b/g/n/ac Wi-Fi
Channel Bandwidth20/40/80/160 MHz
Wireless SecurityWPA, WPA2, WPA3WPA, WPA2, WPA3
Mobile AppTP-Link Deco 
(Android + iOS)
TP-Link Deco 
(Android + iOS)
Web User InterfaceYes (limited)Yes (limited)
Bridge ModeNoNo
AP ModeYes Yes 
USB PortNoNone
Gigabit Port2x auto-sensing2x auto-sensing
Link AggregationNoNo
Multi-Gig Port1x 2.5Gbps auto-sensingNone
Processing Power1GHz Dual-Core CPU1 GHz Quad-core CPU
TP-Link Deco X4300 Pro vs Deco X60: Hardware specifications

Lesser CPU, superior networking specs

As you might have noted, the new Deco hardware seems to have a less powerful CPU. In return, it comes with better Wi-Fi specs. Most importantly, there’s a 2.5Gbps port to host a Multi-Gig broadband connection.

But having a single Multi-Gig port — the case of a dozen other Wi-Fi 6 routers — means there’s no scenario you can have a meaningful use out of this port.

On the wired front, each Deco X4300 unit still caps at 1Gbps. And on the wireless front, we only have a 2×2 client, meaning the connection will limit to the theoretical speed of 2.4Gbps on a good day, with the sustained rate being much lower.

Wi-Fi 6 in layman’s terms: Real speeds, range, and more

Mind the marketing hype

Yet, like the case of other vendors, TP-Link used this port to prop up the Deco X4300 Pro a great deal with superlatives, such as “ultra-fast”, “ultra-low latency”, “4,300 Mbps”, “game-changer, “AI-driven mesh technology”, etc.

Those fancy words are just marketing hype. At the core, this new Deco is a Gigabit-class Wi-Fi system, and there’s nothing wrong with that.

The new mesh features Dual-band Wi-Fi. As a result, in a fully wireless setup, its performance will fluctuate significantly due to signal loss. And if you want to cover “7000 ft2” (650 m2) as TP-Link claims, it’s a sure thing that real-world speeds will slow down to a crawl.

Mesh Wi-Fi: How to best use multiple broadcasters

Wired backhaul to the rescue

But the Deco X4300 support wired backhauling — you can use network cables to link the hardware unit. And in this case, you can expect Gigabit-class Wi-Fi performance from it when used with supported Wi-Fi 6 clients connected to the 5GHzband.

Deco X4300 Pro Ports
Each Deco X4300 Pro router has three auto-sensing ports, two Gigabit, and one 2.5Gbps (bottom).

And since there are three network ports on each unit, users can daisy-chain the hardware units without needing a switch.

Backhaul vs fronthaul

A Wi-Fi connection between two direct devices occurs in a single band, using a fixed channel, at any given time. (That’s always been the case before Wi-Fi 7, which might work differently.)

Generally, when you use multiple Wi-Fi broadcasters, like in the case of a mesh network, there are two types of connections: fronthaul and backhaul.

Fronthaul is the Wi-Fi signal a mesh hub broadcasts outward for clients or its network ports for wired devices. That’s what we generally expect from a Wi-Fi broadcaster.

On the other hand, backhaul, a.k.a backbone, is the link between one broadcasting hub and another, be it the main router or another satellite hub. This link works behind the scene to keep the hardware units together as a system. It also determines the ceiling bandwidth (and speed) of all devices connected to a satellite hub.

Dual-WAN: Where the distinction between bandwidth vs speed is clear

When a Wi-Fi band handles backhaul and fronthaul simultaneously, only half of its bandwidth is available to either end. From the perspective of a connected client, that phenomenon is called signal loss.

When a band functions solely for backhauling, it’s called a dedicated backhaul band. In a mesh system, only traditional Tri-band hardware with an additional 5GHz band can have a dedicated backhaul band.

Generally, it’s best to use a network cable for backhauling — that’s wired backhaul. In this case, a hub can use its entire Wi-Fi bandwidth for front-hauling.

In networking, using network cables is always much better than wireless in speed and reliability.

In fact, like the case of all Dual-band Wi-Fi 6 (or Tri-band Wi-Fi 6E) mesh systems, I’d recommend wired backhauling if you intend to get the Deco X4300.

Familiar firmware

As mentioned above, as part of the Deco family, you can expect the Deco X4300 Pro to deliver a similar experience as other Deco sets, including the Deco X60, the Deco X5700, or even the Wi-Fi 6E Deco XE75.

They all share the same setup process, a limited local web interface, a basic set of network/Wi-Fi settings, and the HomeShield protection suite that includes network protection and Parental Controls.

And just like any other Deco, chances are, though, you’ll need to upgrade to the HomeShield Pro version via a subscription to get actual extra features out of the Deco X4300 Pro.

The new mesh will require a login account with TP-Link, which is never good. In return, it’ll offer ease of use, especially when you want to manage your home network remotely.

TP-Link Deco and your privacy

It’s important to note that having to sign in with an account with TP-Link means your mesh system connects to the vendor at all times — you manage your home network through TP-Link.

And that translates into inherent privacy risks. Here’s TP-Link’s Privacy Policy — make sure you trust the company and are comfortable with what it collects from your network.

Privacy is a matter of degree. While it’s never a good idea to manage your network via a third party, data collection varies from company to company.

In short, if you have used a Deco before, you’ll find yourself at home with X4300 Pro. The way it works, different Deco hardware only differentiate themselves via their hardware capability, performance, and cost.

Pricing and availability

And the cost is where the Deco X4300 Pro won’t disappoint.

Per TP-Link, the new mesh system is available today at Best Buy and other retailers. It carries the reasonable price tag of $399 for a 3-pack, which is $50 cheaper than the Deco X60 at launch two years ago — the price has gone down significantly since.

I’m contemplating getting a review set, but from my experience with other Deco sets, chances are the Deco X4300 Pro will be a decent buy, as long as you are happy with its modest hardware and the general shortcomings of the Deco ecosystem itself. Below is the rating of the Deco X60 for reference.

Popular mesh brands: AiMesh, Deco, eero, Orbi, Velop, and more

TP-Link Deco X60's Rating

7.8 out of 10
TP Link X60 Top
Design and Setup


Reliable Wi-Fi performance, good coverage

Super user-friendly, comparatively affordable

Wired backhaul support, can work in AP mode as a system

Useful QoS, Antivirus, and Parental Control features

Eye-catching design


Slow as a wireless mesh, no real-world 160 MHz channel width support

Requires an account with TP-Link to work

No dedicated backhaul band

Zero Wi-Fi customization

Limited web interface, no USB port

Comments are subject to approval.

It's generally faster to get answers via site/page search -- your question/comment is one of many that Dong Knows Tech receives daily. Β 

  1. Strictly no bigotry, profanity, trolling, violence, or spamming -- including unsolicited bashing/praising/plugging a product/brand (β€’).
  2. You're presumed to have read this page in its entirety, including related linked posts and previous comments -- questions already addressed will likely be ignored.
  3. Be reasonable, attentive, and respectful! (No typo-laden comment, please!)

(β€’) Per the πŸ’―no-nonsense policy, all comments with an external link are scrutinized, and most links are redacted. Do not leave a comment if you're, in any capacity, representing a company/product mentioned here! Instead, send Dong Knows Tech a private message or use a PR channel.

Thank you!

Leave a Comment

Ads Block Detector Powered by

😿 Adblocker Detected! (β€’)

Please allow ads when visiting Dong Knows Tech!
Ads pay for the site's free and πŸ’― No-Nonsense content.
Thank You!
Wanna go ad-free? Subscribe! Already a member? Log in!
Need help or got "false positives"? Learn more!